More About Deck Staining Murfreesboro

Wiki Article

About Deck Staining Murfreesboro

Table of ContentsSome Ideas on Deck Staining Murfreesboro You Need To KnowThe Only Guide for Deck Staining MurfreesboroHow Deck Staining Murfreesboro can Save You Time, Stress, and Money.Get This Report on Deck Staining MurfreesboroThe Facts About Deck Staining Murfreesboro UncoveredRumored Buzz on Deck Staining MurfreesboroThe Best Guide To Deck Staining MurfreesboroAll about Deck Staining MurfreesboroDeck Staining Murfreesboro Can Be Fun For EveryoneUnknown Facts About Deck Staining Murfreesboro
Paint also is typically more rot resistant and does a better job of preventing mold and sun damage. Whether you’re starting with a blank slate, an already painted deck, or an already stained deck, paint allows you to completely cover the previous color. With stain, on the other hand, your options become more limited if you’re working with a deck that has already been covered with paint or stain.

If you have a deck, they can be some of the worst parts of a home to maintain for painters and homeowners alike. They are constantly exposed to the sun, rain, dirt, snow, and rocks. If you live in the greater Cleveland area, you know we are used to all weather conditions.

Deck Staining Murfreesboro Things To Know Before You Get This

Deck Staining MurfreesboroDeck Staining Murfreesboro
They vary from solid color stains to transparent to semi-trans colors. Some large coating companies over the years have promoted “restoring or resurfacing” products. There is not one color with transparent staining; it just stains the wood to different tones and brings out the other shades. Staining a deck using these products can produce many different shades of the shadow of color you choose.

It is important to remember this when choosing a stain. While usually better than waterproof wood, the semi-transparent stain doesn’t last as long as a solid color or paint. They soak into the wood, so they are thinner. They don’t create a paint film barrier with a slick surface to protect the wood.

Not known Facts About Deck Staining Murfreesboro

With these types of colors, they are very thin, like water. They are made to soak the wood and preserve its strength and integrity. These stains are more readily available in oil-based versions, which can be hard to work with. Many water-based versions work well also. The downfall with some of these coatings is they need to be re-applied sooner than solid color stains.

Deck Staining MurfreesboroDeck Staining Murfreesboro
It would help if you recoated these types every two years or once it is no longer waterproof. If water beads over the entire surface, you are still suitable for a while. Most decks we come across are stained with a solid color similar to paint. Deck Staining Murfreesboro. Concrete color stains are the most commonly used for a few reasons.

An Unbiased View of Deck Staining Murfreesboro

It’s similar to paint. Closing to a painted surface will do cleaning and maintaining the deck easier. While paint can peel off any surface, eventually, it creates a barrier between the wood and the elements. Like paint, the surface film will protect the wood because it is thicker, but it doesn’t soak into the wood as much.

Soaking in primarily applies to new wood on decks that haven’t been stained. Why the paint would peel is caused by many different reasons. With decks, most of your problems can come from water issues. make sure water isn’t beading up on the surface of your deck. This means it is not ready to soak in any stain, so the product will likely fail.

Our Deck Staining Murfreesboro Statements

Deck Staining MurfreesboroDeck Staining Murfreesboro
One type was sold as a super thick coat to make your deck surface look brand new and last Visit This Link for years. Like many things in life, not everything holds up to its promises. When they fail and crack and begin letting water in, these thick coatings can also allow water to get underneath them and rapidly rots the wood of your deck.

Now, this might sound good to some people as thicker is better? It may work in some climates, but our weather varies greatly here in Cleveland. I imagine the temperature changes would have something to do with it besides the rain and snow pummeling onto the deck. Deck Staining Murfreesboro. When your deck isn’t properly maintained, the wood can dry out and start to crack.

The Best Guide To Deck Staining Murfreesboro

Regular coatings prevent this to protect the wood. There are many issues homeowners in the Cleveland area can have with decks. Below are some of the most common reasons. They are also expressly excluded from every painting warranty I have ever reviewed. If you do not clean your gutters regularly, it can create even more water on your deck to speed up the failure process.

If you don’t, it may affect your deck’s life and other parts of your home. Decks sometimes are built so close to the land that they hold moisture underneath them. It will not last very long if your deck is built this low to the ground and not made of plastic.

Deck Staining Murfreesboro Can Be Fun For Everyone



Wood decking can remain covered by things that will help to retain moisture and accelerate the degrading process. Putting rugs on your decking is very bad as this keeps the water when they get wet. Anything that is going to hold water on your deck. (leaves, plants, fabric items) Deck staining with semi or transparent stains should be done every 2-4 years, especially for Cleveland painters that deal with seasonal changes and wet weather.

If they are not repelling water, it is time for a cleaning and a new coating or two to be applied. Not staining the deck when regularly needed will cause the wood to rot and or dry out. It can get so dry when exposed to extreme weather that it starts to split and crack.

The Facts About Deck Staining Murfreesboro Uncovered

Now the water can penetrate deep into the wood and degrade it. It will hold the water much longer in those This Site cracks. Later the boards begin to cup and have water on their surface longer, not just in the gaps. Cupping is the most advanced stage of deck board failure.


Soon it may be time to replace your deck or at least a few boards. If you have a failing deck coating, maybe one of those thick resurfacing coatings, you first need to clean the deck. You can wet it with a hose and scrub the wood with a brush and some deck cleaner before rinsing.

Some Known Details About Deck Staining Murfreesboro

We scrape all loose material off before coating. Doing it yourself, you may want to try and pick off all the layers, but it will be very time-consuming, and you will see why we don’t do it. Then stain it with a brush or roller over everything. Make sure to get in the cracks and crevices to bind the old coating and protect it from water.

We can help ensure your deck is protected correctly and stays looking new with our professional coatings.

The smart Trick of Deck Staining Murfreesboro That Nobody is Talking About

Painting visit and staining your deck are both great options, but each is designed to achieve a different goal. Paint is designed to last longer and comes in a greater range of colors, but it can also lead to water pooling. Plus, damage to your deck becomes more visible due to flaking and peeling (Deck Staining Murfreesboro).

While staining may only come in different shades of brown, it’s designed to highlight the grain of the wood. It’s a more natural look that adds an anti-UV layer to your wood. Ultimately, the right choice depends on how you want your deck to look. When you request a free consultation, our experts will discuss your options and help you make the right choice for your home.

Report this wiki page